SSBF-1200MM Semi-Automatic Diamond Saw Blade Segments Welding Frame
Semi Automatic Diamond Saw Blade Segment Brazing Machine is a newly developed machinery for the industry. Display & adjustment device for segment centering adjustment. Patented design-arrow point segment clamp. Improved precision & durability. Segment clamp is made of Ceramic alloy material for improved durability & heat resistance.
It’s easy to operate, precise, stable & high cost to performance ratio, comparing to imported machine. This diamond saw blade welding rack machine improves the brazing precision & torque strength of diamond circular discs and reduces sharpening & labor cost significantly.
Product Details
Main Features:
- A switch controls the heating of the welding machine with the clamping head andsaw blade segment
- Manual/semi-automatic welding
- Double cylinder clamping ensures the welding accuracy of the segment
- Double cylinder clamping prevents the saw blade welding process stress damage
- The machine head part adopts mechanical geometric alignment to ensure precise saw blade welding.
- Safe and simple operation,basic training is sufficient for generalworkers.
- Reduce labor intensity and easier to use.
- Our factory can customize welding frames of various specifications and styles according to customer needs.
Equipment Parameter:
| Model | SSBF-1200 |
| Scope of application | φ300-1200MM diamond saw blade segment welding |
| Welding accuracy | ±0.03mm |
| Welding diameter in horizontal position | 900mm |
| Equipment power | 800W |
| Water source requirement | ≥0.3Mpa, 2-5L/min |
| Ar source requirement | 0.6-0.8 MPa |
| Equipment Size | L880*W780*H1450mm |
| Equipment net weight | 130KG |
Installation Instructions:
- Based on the size of the conventional saw blade, determine the height of the machine base and install it according to the installation diagram
- Correct the verticality of the welding frame and the center of gravity of the foundation, and fix the frame horizontally.
- Connect the cooling water.
- Place the welding machine properly, connect the induction coils, adjust the welding position, and connect the inlet and outlet pipes of the welding machine.
- Connect the air intake source and adjust the pressure of each pressure regulating valve.
- Connect the power supply, welding machine power supply, automatic temperature control timing power supply, and water pump power supply.
- Adjust the welding positions at various locations: parallel position between the copper water clip and the saw blade substrate, opening position of the copper water clip, position of the quick cooling nozzle, welding position of the induction ring, welding height position of the copper clip head, and position of the saw blade substrate.
- To repair the ceramic chuck, first remove the lower limit body, clamp the repair block between the two copper water clamps, operate the down pressure handle, and move the ceramic chuck up and down to ensure parallelism with the two copper water clamp surfaces.
